From off-grid residential to agricultural needs Matrix Energy can provide
the components or a complete system to meet your water pumping needs powered
by photovoltaics or wind generators. Pumping systems using battery storage
are called "Demand" systems while all other pumping systems are called
"Simple" systems. In a Demand system a charge controller regulates the
amount of current entering the batteries, and protects them from
overcharging or over-discharging. In a Simple system, the pump controller
regulates the amount of current and voltage entering the pump itself, to
ensure optimum shining then there are two options - chemical storage, where
the power system keeps the battery bank charged, which in turn powers the
pump on demand and mechanical storage where the water itself is stored in a
reservoir.
Shurflo Submersible Pump Ideal for low volume pumping from deep wells,
lakes or ponds to a cistern, the SF-9325 is capable of pumping 80 gallons
per hour in full sun and from depths up to 230 feet. Designed to fit in a
minimum 4" well casing, the 9325 pump works on 12 volts or for maximum
performance, 24 volts. Electrical connections are made through a watertight
submersible gland, so the cable can be disconnected from the pump without
severing the wires. Features include a durable polymer housing and stainless
steel fasteners, connects to 0.5" ID tubing and is field serviceable with
replacement motors, seals and valves. Use with optional SF-9022 to increase
pump output up to 30% in low light conditions. One year warranty.
Floating Pumps
This series of floating
submersible pumps feature the RU with high capacity up to 12 ft lift. These
pumps offer good reliability with long life at a reasonable price. The
efficient M5 can pump up to 22 feet m), and has a maximum flow rate of 6 GPM
(7 m), and has a maximum flow rate of 6 GPM (23 L/min). The versatile
M10 can pump up to 45 feet (14 m), and has a maximum flow rate of 15 GPM (57
L/min). For larger volume applications, the M30 offers lifts up to 10 m or
flow rates to 18 GPM (68 L/min). These solar direct or battery powered pumps
may be serviced in the field, offer long life and can even tolerate silty
water.
#14-26-002 M-30
$2332
# 14-26-003 M-10
$2332
# 14-26-004 M-5
$1340
# 14-26-005 RU
$525
LINEAR CURRENT BOOSTERS
Maximize the output of any motor driven load using one of
these high efficiency liner current boosters which increase output up to 40%
in reduced sunlight conditions. Each model covers 12 and 24 V systems with
15 and 30 V output.
Weatherproof enclosure Voltage Limited Output Internal Fuse-
10 A / 7 A automotive style fuse Transient Protected -input and output Float
Switch input for on/off control
# 14-25-001 15 A
$325
# 14-25-002 7 A
$142
Submersible Pumps
Submersible pumps are designed for deep wells and large water volume
requirements. To meet these demands we offer three solar direct pump choices
providing up to 10000 GPD (imperial) and for lift heights of 500 ft or less.
Contact us for more details. Maximum pumping
specifications based on a HR Series: 0.80 GPM @ 450 ft, 6.9 amp 1.70 GPM @
500 ft, 6.9 amp ( 48 VDC) Mini Series: 1.87 GPM @ 100 ft, 3.3 amp Centric
Series: 3.70 GPM @ 66 ft, 7.5 amp
Canadian Electrical Code
Consult CSA Standard C22.1-98, Section 50 of the Canadian Electrical Code
for information concerning photovoltaic power system installations. Be safe,
please.
#14-26-009 Centric ,Series 12/24V V
$325
#14-26-008 HR Series 24 V
$142
#14-26-007 HR Series
$2295
For heavy duty applications this 45 PSI pressure pump, #
14-47-007 has cooling fins to keep it running efficiently. Self priming to
12 ft (3.7 m) this pump delivers up to 3.8 GPM also features a one way check
valve to prevent reverse flow. 12 or 24 volt .
As above but non-heavy duty version. 3 GPM, 12 or 24 V
S-4525 is a sensor controlled variable- speed pump designed
to run without the need for a pressure tank. Supplying up to 4.5 GPM (14
LPM) it varies its energy use according to demand. It handles water
temperatures up to 70° C, and automatically adjusts to 12 or 24 V and has no
switch, contacts or points to burn out. Supplied with inline filter and
fittings.
# 14-15-006
$345
S-4325 provides smooth water flow - 4.5 GPM (17.0
l/min.) for 5 or more fixtures with a 1-5 gallon (3-20 liter) accumulator
tank or up to 3 directly. Self priming, this four chamber diaphragm pump
runs dry without harm to the pump. Includes two installation.
# 14-15-004 24V
$219
# 14-15-003 12V
$225
S-4406 offers from 1 GPM to over 3.2 GPM (3.8 to over
12.1l/min.) eliminating the need for an accumulator tank and includes a
bypass valve which greatly reduces pulsating water and pressure switch
chatter. Self priming, it runs dry without harm to the pump and includes
1/2" straight pipe ports. CSA approved. Specify 12 or 24 V
# 14-15-005
$120
S-2840 is an integrated pump and 1.1 gal (4.1 l) accumulator
tank system that may be mounted vertically or horizontally. Self- priming up
to 10 ft. (3.1M), it can run dry without harm and supplies up to 4.5 GPM (17
l/min.) The FDA materials in the pump and accumulator tank are suitable for
drinking water. Includes FLOJET strainer and assorted ports for easy
installation. Specify 12 or 24 V
# 14-15-002
$418
NEW - Great value pumps When faucets are turned on, the
pulsation dampening pump generates a variable 'on- demand' flow rate, which
does away with the need for separate accumulator tanks. This new three
chamber diaphragm pressure pump dispenses a super quiet, super smooth water
flow of up to 7 litres per minute (1.9 usgpm) at temperatures up to 160 0 F.
Self priming up to 1.8m (6 feet), and run dry without damage. #
14-15-015 24 V, Variable pressure pump.
# 14-15-014 12 V, Variable pressure pump
$
# 14-15-015 24 V, Variable pressure pump
$
SLOWPUMP
Any of the 1304 or 2507
Slowpump models can operate directly off of solar panels or batteries and
can lift water as high as 450 vertical feet (137m). They can be operated at
half of their rated voltage which provides half the rated flow and requires
half the required wattage for a given lift. This means that your Slowpump
installations are expandable and very flexible. Wearing parts typically last
5 to 10 years. Overall life expectancy is 15-20 years. See the chart below
for output performance.
IMPORTANT: The rated power of the solar array must exceed the pump watts
by 20% or more. All Slowpumps require filtration of up to 10 microns and
must not run dry.
# 14-09-001 Model 1304, 12 V
$725
# 14-09-002 Model 1304, 24 V
$725
# 14-09-003 Model 2507, 12 V
$725
# 14-09-004 Model 2507, 24 V
$725
14-02-002
Mercury pump-up float switch (NO)
$88
14-02-001
Mercury pump-down switch (NC)
$88
14-26-006
#10 pump cable, per meter
$2.50
14-26-001
#8 pump cable, per meter
$2.50
FLOJET Accessories
14-15-011
Accumulator tank for Flojet 2840 system
$108
14-15-007
Replacement pump head for 4325
$96
14-15-008
Replacement pump head for 4406 or
4405
$96
14-15-009
Replacement pressure switch for 4325
$32
14-15-010
Replacement pressure switch for 4406 or
4405
$32
14-15-001
Inline filter for Flojet series pumps
$13
14-15-012
Replacement Pressure Switch - 40 PSI
$30
14-15-013
In Line Water Pressure Regulator in 150
PSI-45 PSI Ol
$32
SHURFLO Accessories
14-47-003
Shurflo Accumulator Tank, 2.2 USG
for SFHP and SSP 14-47-006
