AIR-X Wind Generators

AIR-X WIND MODULE: WORLD’S #1 SELLING BATTERY CHARGING WIND TURBINE

 

Air X Land

 

 

The AIR is by far the world’s number one selling small wind turbine. In late 2001 we introduced an entirely new level of technology which previously was only found in today's state-of-the-art mega-watt-class wind turbines.

The AIR-X incorporates a new microprocessor based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.

The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.

Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.

Improved battery charging: Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.

WHERE AND HOW THE AIR-X WIND MODULE IS USED

  • The AIR-X is an ideal product for the person that needs a little power for basic appliances such as TV, radio and a few lights.
  • Common applications for the AIR-X
  • Remote Cabins
  • Telecommunication Towers
  • The Developing World
  • Monitoring Stations


    Features

    • 3-YEAR WARRANTY
    • Carbon Fiber Composite Blades
    • Aircraft quality aluminum alloy castings
    • Exclusive Brush-less neodymium cubic curve alternator
    • Sophisticated internal battery charge regulator
    • Maintenance-free - Only two moving parts

    Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and reducing noise.

[Image Not Available]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 The latest evolution in small wind turbines. The AIR-X builds upon what made AIR the world's #1 selling small wind turbine with new technology previously found only in today's state-of-the-art mega-watt-class wind turbines.

All of these features are primarily found within the body of the turbine. The new microprocessor based speed control results in increased performance, improved battery charging capability and the reduction of ?flutter? noise from the machine. The controller
allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and then efficiently delivers the energy to the battery. The turbine's smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with the AIR 403 and 303 in high winds. Furthermore, a new series of carbon-reinforced blades with a modified pitch angle further increases power production.

The new electronics are a considerable improvement over the AIR 403 controller that consists of diode-rectification and a simple off/off voltage switch. Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds, causing loud flutter noise in winds above 35 mph (16 m/s). AIR-X circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum output will resume.


The Benefit: Quieter and neighbor friendly operation.

Self-Regulating: Internal charge regulator with adjustable voltage protects your batteries. When batteries are full, AIR X goes into brake mode to extend life.

Protection: In high winds composite blades flex to increase drag and internal electronic braking slows the rotor RPM.

Easy Mounting on 1-1/2” Schedule 40 pipe.

AVAILABLE OPTIONS:

• AIR Stop Switch - 50 Amp - SSWD2311

• Circuit Breaker - 50 Amp - SSWD3447

Combine WIND & SOLAR For Steady Year-round Production

15-39-002  Air - X Land -12 vdc   400 watt  $839  
15-39-003 Air - X Land 24 vdc 400 watt  $839  

 

              Air X Marine

 

 

 

 

 

  

The AIR Marine is by far the world’s number one selling small wind turbine for Sailboats. In late 2001 Air-X  introduced an entirely new level of technology which previously was only found in today's state-of-the-art mega-watt-class wind turbines.

The AIR Marine incorporates a new microprocessor based technology that results in increased performance, improved battery charging capability, greater reliability and the reduction of “flutter” noise from the machine.

The controller allows for peak-power tracking of the wind by optimizing the alternator's output on all points of the cubic curve and efficiently delivers the energy to the battery. The turbine’s smart controller allows it to actually control blade rotation speed thus eliminating the buzzing noise commonly found with most small wind turbines.

Much Lower Noise: Previous AIR wind modules relied on their aero-elastic blade design for protection in high winds. This caused a loud flutter noise in winds above 35 mph (16 m/s). AIR-X’s circuit monitors the wind speed and electronically slows the blades as it reaches its rated output preventing it from going into flutter. This results in a much quieter wind turbine. In high winds, the AIR-X will continue to produce power at a reduced level until the wind decreases, at which point maximum potential output will resume.

Improved battery charging: Previous AIR designs required 300-400 amp hour battery banks so the trickle charge of the wind turbine could be adequately absorbed. The AIR-X’s charge controller periodically stops charging, reads the battery voltage, compares it to the voltage setting and if the battery is charged, it completely shuts off all current going to the battery. This function is performed within a few milliseconds. The closer the battery is to reaching its full state of charge, the more often the AIR-X’s circuit repeats this action. This means any size battery bank from 25 to 25,000 amp hours or higher can be charged safely. When the battery has reached its charged state, the AIR-X will slow to an almost complete stop. Only when the battery has dropped below its voltage set point will it startup and resume charging.

Corrosion Resistance: Acid etched castings, double coated with marine grade powder coat for superior protection from the environment.

  • Acid etched castings double coated with marine grade powder coat for
    superior protection from the environment.
  • Anodized hub
  • Tuff-Gel coated fasteners to prevent seizing of components
  • Tin plated wires
  • Sealed alternator

Features

  • 3 YEAR WARRANTY
     
  • Carbon Fiber Composite Blades
     
  • Aircraft quality aluminum alloy castings
     
  • Exclusive Brush-less neodymium based sealed alternator
     
  • Sophisticated internal battery charge regulator
     
  • Maintenance-free - Only two moving parts
     
  • Full Marine Tower Kit available for easy mounting on sailboats.
     
  • Exclusive Auto-brake-feature that slows the AIR to a silent spin when the batteries are charged thus extending bearing life and eliminating noise.
     
  • Marine powder coating and stainless steel fittings for corrosion protection in a marine environment
     
  • High Wind Safe Mode - Automatically slows turbine in potentially damaging winds. Reduces noise and distractions for peace-of-mind when on or off your boat.

    Includes the following upgrades:

    • All hardware is a marine grade stainless steel.

    • Assembly includes '

    “Tef-gel” compound to resist corrosive activity between dissimilar metals like stainless steel and aluminum.

    • Body and electronics are completely sealed for prevention of water ingress, even under brief immersion conditions.

    Click Here For The Brochure
15-39-004 AIR-X - 12V  - 400 WATT-MARINE $ 1 ,055
15-39-005 AIR-X  24V - 400 WATT-MARINE $ 1 ,055

 

Air X - Air Industrial

 

 

The Air Industrial is a wind turbine capable of resisting the harsh environments that generally accompany mountaintop repeater sites and off shore platforms. Southwest Windpower's engineers spent two years in research with companies such as Chevron, Texaco and Cellular One to design a product capable of reliability producing power for remote sites.

Combining wind and photovoltaics in hybrid systems are quickly becoming the standard in renewable energy installations. This is due to seasonal fluctuations of both wind and solar energy resources that make it an ideal combination.

Maintenance-free performance, easy installation, and high output make AIR Industrial ideal for virtually any remote battery charging application. Installations range from Alaska to Antarctica.
 

Features
  • 3 YEAR WARRANTY
     
  • Simple installation; no tower is necessary. Can be attached to existing towers.
     
  • Variable pitch Aerolastic carbon matrix blades
     
  • Aircraft quality aluminum alloy castings
     
  • Brush-less neodymium cubic curve alternator
     
  • Maintenance-free - Only two moving parts
     
  • Finned aluminum heat sink for maxim cooling effect in high wind average areas
     
  • Upgraded electronics and wiring for improved reliability over standard models
     
  • Externally regulated controller designed for rugged environments
     
  • Quality powder coated aluminum body, all stainless steel hardware

Choose Air Industrial to minimize downtime and reduce operating costs. Based on the best selling AIR Module, the AIR Industrial is engineered with extra reliability for those harsh mountain-top and offshore sites.               

Features:

• Anodized Aluminum Cooling Fins for extra cooling in sustained high output conditions.

• Conformable Coated Electronics for extra protection against corrosion in outdoor and marine environments.

• Powder coated cast aluminum body c/w Stainless Steel Hardware.

Click Here For The Brochure

 

                   

15-39-006 400 WATT INDUSTRIAL, NO REGULATOR OR HEATING ELEMENT, 12 V  $ 1,086
15-39-008 400 WATT INDUSTRIAL, NO REGULATOR OR HEATING ELEMENT, 24 V $ 1,086
15-39-010 400 WATT INDUSTRIAL, NO REGULATOR OR HEATING ELEMENT, 248 V  $ 1,086

If you need more power than the AIR-X, but still want a small simple to install turbine, then consider the Whisper 100 or Whisper 200 turbines.

 

Solution Graphics

Home Solar Info. Products Contact Us Links

Solar Energy...It's Here...It's Free...It's Forever